Christrio - Gelacquer LED/UV Application

1-800-574-4252

Gelacquer LED/UV
Application Instructions

	Applications: Clear Gel \| Designer Gel \| French Gel \| Xpress Gel \| Gelacquer To place an order, or to sign up for a class please call us at 1-800-574-4252 or email sales@christrio.com

	1: Prep the nails as usual. Cleanse the nail very well with wiping solution. Wait for nails to be completely dry. (Chalky finish)
	2: Apply a thin coat of Gelacquer LED basecoat to all 10 nails and then cure under LED light for 10 seconds; 30 seconds with UV lamp.
	3: Remove the residue after it is completely cured with a wiping solution and let dry.
	4: Apply a thin coat of desired color to all 10 nails. Cure under LED light for 10 seconds; 30 seconds with UV lamp.
	5: Repeat Step 4 if color needs to be darker.
	6: Apply Gelacquer topcoat to all 10 nails. Remove sticky residue after completely cured. Cure under LED light for 10 seconds; 30 seconds with UV lamp.
	7: Enjoy your beautiful Christrio manicure.
	HOW TO REMOVE: 1:Buff the shine off the surface of the nails. 2:Wet cotton with acetone, wrap around the nail and cover with kitchen foil. Wait for a few minutes, then remove wrap one by one. 3:Take an orange wood stick and gently push on the loosened gel downwards. *The gel does not disintegrate in the acetone like acrylic polymer/powder does, it softens with acetone.* 4: Gently condition the nails with cuticle oil or lotion.
	Applications: Clear Gel \| Designer Gel \| French Gel \| Xpress Gel \| Gelacquer To place an order, or to sign up for a class please call us at 1-800-574-4252 or email sales@christrio.com